It’s time to take your Maker projects to the next level. Our team of engineers, designers, and innovators have worked to combine state-of-the-art technologies with our intuitive DigiLab software to create the first Dremel Laser Cutter of its kind. In addition, Dremel worked with UL to pioneer industry-first safety standards, taking the worry out of making so you can concentrate on your next project.
With over twenty-thousand hours of extensive quality and endurance testing, the Dremel DigiLab Laser Cutter is built for reliability to ensure continuous runtime during all your project needs.
Engineered for ease of use and reduced frustration, Dremel has worked to provide a Laser Cutter with simplified systems you can trust. Equipped with intuitive, dynamic software, you’ll have everything you need in the box to get set up and creating.
A trusted brand for makers with over 85 years experience in customer service, engineering and product development, Dremel provides an ecosystem of benefits that go beyond the DigiLab Laser Cutter. From a 1-year warranty, stocked user-replaceable parts and materials, and project content for all levels, to our U.S-based, laser-trained customer service team, Dremel is here for you.
The first ever UL-certified laser of its class, our patented array of smart sensors with real-time diagnostics continuously monitor the laser so users can have peace of mind and focus on creativity.
Specifications
- Engraving Area: 18.4”x12” (467 mm x 304.8 mm)
- Cutting Area: 20”x12” (508mm x 304.8 mm)
- Max Engraving Height: 1.25” (32 mm)
- Max Cutting Height: ¼” Wood and Acrylic (6 mm)
- Machine Dimensions: 32”x20”x8.25” (812.5mm x 508mm x 209.55mm)
- Laser Weight: 70lbs (31.75 kg)
- Shipping Weight: 100lbs (45 kg)
Laser Tube
- Laser Type: Sealed CO2 Laser Tube
- Laser Power: 40w
- Laser Classification: Class 4 with Lid Open, Class 3R with Lid Closed
- Beam Size: 6.5mm @ 1.2m
- Working Current: 20mA
- Wavelength 10.6 micrometers
What's Inside
- - Laser cutter
- - Hex Box
- - Reusable tote bag & straps
- - Test Material
- - Honeycomb Plate
- - Quick Start Guide
- - Water hose (2)
- - Air tube
- - Exhaust shroud screws
- - Exhaust duct clamps
- - Hex Box connector cord
- - Hex Box cap
- - Hex key wrench
- - Alcohol wipes
- - Spacer puck
- - Alignment paper
- - Exhaust duct
- - Exhaust shroud
- - Ethernet Cable
- - Operating/Safety Instruction manual
System
- Driving System: Nema Stepper Motor
- Cooling Mode: Forced Air Heat Exchanger with Recirculating Water
- Gantry System: Linear Ball Bearing Shaft Y-Axis, Rail Guideway X-Axis
- No Protective Laser Eyewear Required
Operating Environment
- Recommended Environmental Temperature: 60-85°F (16-29°C)
- Level Workspace
- Dry Workspace Environment
Electrical Requirements
- Input Rating: 120V, 60Hz, 5Amps
Computer Requirements
- On Board Full Color Touchscreen
- Mac & PC Compatible
- Works with Chrome, Safari, Firefox, & IE
- Recommended Screen Size: 11”
- Min Screen Resolution: 1024x768 Pixels
- Ability to Connect Through Network (Ethernet or WiFi) without Internet Connection
Standard Equipment
- Z-Axis: Manual Laser Head Focus
- Focal Lens: 2”
- Integrated Ground Fault Circuit Interrupter (GFCI)
- Hex Box Integrated Cooling and Air Assist System
- Red Dot Pointer: Integrated Beam Combiners
- Integrated Exhaust System
- Wide Angle, High-Def Camera
- Honeycomb Aluminum Plate for Ventilation
- Warranty: 12 Months
- Included Kit Components Offer Complete Solution For Laser
Carve, etch, cut, and engrave dozens of materials to bring your ideas to life.
From the moment you receive your Laser Cutter to when the first laser beam starts cutting or engraving your project, setting up your Dremel DigiLab Laser Cutter takes minutes. Everything you need to start making comes inside the Laser Cutter box, including our Hex Box™ integrated cooling system and user-friendly Quick Start Guide.
Explore Laser Cutter projects in the Dremel Project Gallery, then share one of your own. We can’t wait to see what you’ll create.
